MURAENA
The Muraena bench is available in two configurations: (1) mobile version on wheels, to be used with any two-post lift or (2) with our scissor lift (4.5 or 6.0 Tons).
On both models it is possible to mount different jigs (both universal and specific) or sill clamps. Additionally, two types of pull posts: Muraena or Piranha. Both models are designed to mount the Universal Jig System and the Contact Evolution Electronic Measuring System on our patented Cross Beams.
CONFIGURATION WITH LIFT
The bench combined with our special scissor lift is mobile and tilt able at both ends. Its dimensions have been optimized to allow maximum accessibility, both inside and outside the frame during the entire repair process, in order to work efficiently and with ergonomics for the technician in mind. Its technical specs allow the end user to perform realignment operations when repairing cars, light commercial vehicles and off-road vehicles, while maintaining a comfortable working posture. The frame is made with a high-strength steel box section, milled to ensure precise positioning of the control points. It can be equipped with one or more Muraena or Piranha pull post positioned very close to each other.
TECHNICAL FEATURES
Muraena frame benches
Frame length 4.5 m 5.2 m
Frame weight 940 Kg 1090 Kg
Muraena scissor lifts Capacity 4.5 Ton. Capacity 6,0 Ton.
Frame length 4.5 m 5.2 m
H. min lifting 320 mm 320 mm
H. max lifting worktop 1800 mm 1800 mm
Weight lifter with frame 1.60 tons/1.70 tons 1.70 tons
Nominal power 2 Kw 2 Kw
Nominal tension 240/380 V 240/380 V
Rated current 4.3 A 4.3 A
Nominal frequency 50 Hz 50 Hz
Max rising pressure 280 Bar 280 Bar
Max descent pressure 130 Bar 130 Bar
Hydraulic oil Shell tellus oil HM46 or with compatible viscosity
Electrohydraulic control unit weight 60 Kg
Piston Power Muraena Piranha
Pulling Power 12 tons 10 tons
Pushing power 12 tons -
On both models it is possible to mount different jigs (both universal and specific) or sill clamps. Additionally, two types of pull posts: Muraena or Piranha. Both models are designed to mount the Universal Jig System and the Contact Evolution Electronic Measuring System on our patented Cross Beams.
CONFIGURATION WITH LIFT
The bench combined with our special scissor lift is mobile and tilt able at both ends. Its dimensions have been optimized to allow maximum accessibility, both inside and outside the frame during the entire repair process, in order to work efficiently and with ergonomics for the technician in mind. Its technical specs allow the end user to perform realignment operations when repairing cars, light commercial vehicles and off-road vehicles, while maintaining a comfortable working posture. The frame is made with a high-strength steel box section, milled to ensure precise positioning of the control points. It can be equipped with one or more Muraena or Piranha pull post positioned very close to each other.
TECHNICAL FEATURES
Muraena frame benches
Frame length 4.5 m 5.2 m
Frame weight 940 Kg 1090 Kg
Muraena scissor lifts Capacity 4.5 Ton. Capacity 6,0 Ton.
Frame length 4.5 m 5.2 m
H. min lifting 320 mm 320 mm
H. max lifting worktop 1800 mm 1800 mm
Weight lifter with frame 1.60 tons/1.70 tons 1.70 tons
Nominal power 2 Kw 2 Kw
Nominal tension 240/380 V 240/380 V
Rated current 4.3 A 4.3 A
Nominal frequency 50 Hz 50 Hz
Max rising pressure 280 Bar 280 Bar
Max descent pressure 130 Bar 130 Bar
Hydraulic oil Shell tellus oil HM46 or with compatible viscosity
Electrohydraulic control unit weight 60 Kg
Piston Power Muraena Piranha
Pulling Power 12 tons 10 tons
Pushing power 12 tons -