Manta
The Manta bench is available in two configurations: in the mobile version on wheels, to be used with any two-post lift or in the version with scissor lift (6.0 Tons). Two lengths are available (1) 5.2 m and (2) 6.0 m
On both models it is possible to mount with our jig systems (both universal and specific) and the Manta-type sill and frame clamps. Both models are designed to mount the Universal Jig system and the Contact Evolution Electronic Measuring System on our patented crossbeams.
CONFIGURATION WITH LIFT
The bench combined with our special scissor lift is mobile and tilt able at both ends. Its dimensions have been optimized to allow maximum accessibility, both inside and outside the frame during the entire repair process, in order to work efficiently and give the technician comfortable ergonomics. Its technical specifications allow the end user to perform realignment operations when repairing cars, light commercial vehicles and off-road vehicles, all while maintaining a comfortable working posture. The frame is made of high-strength steel, milled to ensure precise positioning of the control points and powder-coated. The climbing equipment thanks to its specific design allows loading on board the vehicle without dismantling the basic equipment.
TECHNICAL FEATURES
Ground benches with Manta frame
Frame length 5.2 m 6.0 m
Frame weight 730 Kg 860 Kg
Lifts with Manta line frames Scissor lift with 4.5 ton capacity. Scissor lift with 6,0 ton capacity.
Frame length 5.2 m 6.0 m
Scope 6.0 tons 6.0 tons
H. min lifting 320 mm 320 mm
H. max lifting worktop 1800 mm 1800 mm
Weight lifter with frame 1.40 tons 1.40-1.50 tons
Nominal power 2 Kw 2 Kw
Nominal tension 240/380 V 240/380 V
Rated current 4.3 A 4.3 A
Nominal frequency 50 Hz 50 Hz
Max rising pressure 280 Bar 280 Bar
Max descent pressure 130 Bar 130 Bar
Hydraulic oil Shell tellus oil HM46 or with compatible viscosity
Electrohydraulic control unit weight 60 Kg
Pull Post Manta
Pulling Power 10 tons
On both models it is possible to mount with our jig systems (both universal and specific) and the Manta-type sill and frame clamps. Both models are designed to mount the Universal Jig system and the Contact Evolution Electronic Measuring System on our patented crossbeams.
CONFIGURATION WITH LIFT
The bench combined with our special scissor lift is mobile and tilt able at both ends. Its dimensions have been optimized to allow maximum accessibility, both inside and outside the frame during the entire repair process, in order to work efficiently and give the technician comfortable ergonomics. Its technical specifications allow the end user to perform realignment operations when repairing cars, light commercial vehicles and off-road vehicles, all while maintaining a comfortable working posture. The frame is made of high-strength steel, milled to ensure precise positioning of the control points and powder-coated. The climbing equipment thanks to its specific design allows loading on board the vehicle without dismantling the basic equipment.
TECHNICAL FEATURES
Ground benches with Manta frame
Frame length 5.2 m 6.0 m
Frame weight 730 Kg 860 Kg
Lifts with Manta line frames Scissor lift with 4.5 ton capacity. Scissor lift with 6,0 ton capacity.
Frame length 5.2 m 6.0 m
Scope 6.0 tons 6.0 tons
H. min lifting 320 mm 320 mm
H. max lifting worktop 1800 mm 1800 mm
Weight lifter with frame 1.40 tons 1.40-1.50 tons
Nominal power 2 Kw 2 Kw
Nominal tension 240/380 V 240/380 V
Rated current 4.3 A 4.3 A
Nominal frequency 50 Hz 50 Hz
Max rising pressure 280 Bar 280 Bar
Max descent pressure 130 Bar 130 Bar
Hydraulic oil Shell tellus oil HM46 or with compatible viscosity
Electrohydraulic control unit weight 60 Kg
Pull Post Manta
Pulling Power 10 tons